Auto Blogs | Car Forums

any possibilities to restore brake pressure after replacing caliber and also bleeding back right side of 2000 lincoln ls v6

My brake rotors on my 2002 GMC Siera P/U were extremely rusty.  I had them machined and installed new pads.  I am now thinking of the question: Is there a difference between the right and the left rotor.  Front to back is of course obvious.  Does it matter which rotor goes on the left and the right in regards to front and ...

Hi, I was driving on the freeway and all the sudden my brakes got lockdown; the car was going at 60 mph to 20 mph and eventually stop even if I stepped on the acceleration.  I took it to a shop and replaced all 4 disc brakes (pads).  Now it still gets lock down after I drive it for about 6-7 miles.  I brought it back to the shop and ...

We replaced the brakes,calliper and roter and the brake is still not releasing. What can I do to correct this.

Can someone tell me how to change rear brake pads on 2000 tiburon.   keywords: tiburon, hunday, hyundai tiburon, hyundai cars,  

I need to adjust the e-brake, besides the point where the two come together is there anything else i need to do.  Please advise.   keywords: chevy, subruban, cheverlet, chevrolet, chevy suburban,  

Hi my name is Josh and I have a 86 Dodge Diplomat, and my brake pressure will not stay.I can pump it up but after 10 sec or so the pedal goes right to the floor. I have changed the Master Cylinder, Proportioning valve, and the brake lines from front to back.I also have new brake cylinders on the drum brakes. I have done bench bleeding and bleeding ...

My wife drives a 2005 Chrysler Town and County.  Her brakes were bad recently,  squeaking and making the normal noises.  I changed the pads and thought all was fine,  worked fine for a bit.  A little later (about 2 weeks) she said her brakes were making noise...I got in drove it around and also heard more squeaking and a ...

How often should you ahve to replace the brakes in a '96 Mazda? How often should you ahve to replace the rotors or resurface them?   keywords: mazda, mazda cars, mazda lineup,  

Recently I replaced My rear brake pads, rotors and calipers, seeing that the passenger side caliper was leaking. After changing that the brake pedal was still going to the floor. I replaced the master cylinder as well as the pressure control valve on the master cylinder but to no success the brake pedal still goes to the floor. I have bled the ...