Auto Blogs | Car Forums

I am moving from Florida to Minnesota.  Will my 2004 Sebring convertible with a vinyl roof withstand the cold and keep me warm enough?

Question:How do I find out how many White Covertable California Special GT's were produced in the year 2007? I would also like to know what equipment they had? kguillia@aol.com  

        2000 Sebring JXI Security System has mind of it's own ( Works when it want to)  About 6mo ago my remote stopped working properly it would only work sometimes, so I replaced the battery.  After replacing the battery it has not worked since. And now all of a sudden when I attempted to enter my ...

Hello all, has anyone ever experienced the check engine light coming on after bottoming out HARD on a driveway curb? I checked the frame and all was good, no oil leaks, 2000 miles left on oil change. The light has NEVER came on before and it has me worried. [:O]  I do have a locking gas cap but I make sure to turn it "3 clicks". ...

I've had the top frame of my '67 convertible aligned, reproduction latches installed and a new top put on by a profesional top guy.  When the latches are closed to secure the top, the back of the latches are 3/4" above level and at 60 mph there is a 1/8' gap between the top and the windshield header.  When I pull the ...

I've got a 97 Mustang GT Convertible. Bought it with about 50k on it ran tip top after 5k started not to shift under power I would have to come off the gas to shift. Felt as if I had to skip over a gear. Had to get high rpms of the line then come off the gas and it would shit to the high gear. If you were to drive conservatively it just ...

It's a 1986 Chevy Cavalair with a 2.0 motor, I was driving down the freeway the other day when I noticed alot of smoke, behind me. I found out when I got home, It was coming from oil on the motor. I changed two sending units, thinking that it was coming from them. I didn't notice any more oil, after degresing it. I started it up and ran it ...

I have a lebaron to where the top won't go down...everytime I hit a button the motor just clicks...the motor says only use dexron II ATF...but I don't know where to fill it or if that is even the problem...Can anyone give me any advise on how to fix the problem or even how to see if it needs fluid put in ...